Airflotek, Inc.
Airflotek, Inc.
680 Satellite Blvd
Suite 100
Suwanee, GA 30024 USA
Toll Free: 800.581.8524
Local/International: 678.475.9800
Fax: 678.475.6450
Email: info@airflotek.com
Website: www.airflotek.com
Print Back
Extra low watts, sound, and profile
The Envirco® LEAC2 fan filter unit is the first (FFU) with low watts, low profile, and high airflow. The MAC 10® LEAC2 2 x 4 ft (600 x 1210 mm) provides one of the lowest power consumption levels of any FFU in the industry. Running at only 208 watts @ 90 fpm, the unit uses less energy than traditional FFUs and reduces operating costs. The MAC 10® LEAC2 standard model maintains a low profile, measuring less than 13" (318 mm) tall. The MAC 10® LEAC2 comes standard with the filter integral with the unit housing. Room-side replaceable filters and motor blower removable from room-side are available.
Unit of Measure

Specifications

Brands

 N/A Envirco®

Optional Duct Inlet Connection Size

 N/A 10 in12 in14 in254 mm305 mm356 mm

Voltage

 N/A 220 V

Frequency

 N/A 50 Hz60 Hz

Phase

 N/A 1

Full Load Current

 N/A 0.98 A

Filter Housing Material

 N/A Mill Finished Aluminum

Industry Standards / Certifications

 N/A cUL listed (115 V, 208-240 V, 277 V) with standard UL 900 filter, File number E152685 (UL507)

Filter Type

 N/A High Efficiency Particulate Air (HEPA)

Filtrand

 N/A Particulate

High Efficiency Particulate Air (HEPA) Filter Efficiency at 0.3 Micron Size

 N/A 99.99 %

External Static Operating Pressure

 N/A 1.0 inWg200 Pa

Orientation

 N/A Horizontal

Performance

Nominal Unit Size

 N/A 2 x 3 ft

Active Filter Face Area

 N/A 3.8 ft²
Maximum Air Flowrate1 N/A 687 ft³/min

Energy Consumption Rate at Maximum Air Flowrate

 N/A 198 W

Air Flowrate at 90 Feet per Minute (ft/min) Average Speed

 N/A 340 ft³/min

Energy Consumption Rate at 90 Feet per Minute (ft/min) Average Speed

 N/A 189 W
Unit Weight2 N/A 53 lb

Note

 N/A Performance tested in accordance with the (ANSI/AMCA 210-07), (ANSI/ASHRAE 51-07) test standards for Certified Aerodynamic Performance Rating.

90 fpm values based on active filter face area. BTU = Watts x 3.413.

Dimensions

Dimension A

 N/A 23.63 in600 mm

Dimension B

 N/A 35.63 in905 mm

Dimension C

 N/A 14.61 in371 mm

Additional Information

N/A Performance and Innovation
The LEAC2 comes standard with a solid-state speed control and will operate against high external static pressure to provide superior filter life. By taking advantage of a unique combination of motor blower technology, along with Envirco®'s proprietary baffling system, the LEAC2 delivers uniform airflow over a wide range of cfm.

Envirco® MAC 10® FFUs are used worldwide for a variety of critical clean air applications. Learn more about how you can benefit from the LEAC2 in your next critical room application.

Features

N/A

  • Low watts, low profile, and low operating costs
  • Solid State Speed Control - 3 speed switch is not available (LEAC 2 x 4 only)
  • Integrated PSC Motorized Backward Inclined Impeller
  • Walkable plenum (excluding pre-filter), rated to 250 lbs.
  • Snap-in 20 x 20 washable pre-filter
  • Manufactured to IEST recommended practices; IESTRP-CC036.1
  • Aluminum Diffuser Screen (RSRE)
  • Room-side Challenge Ports standard on RSRE
  • Room-side Replaceable Filter and Motor Assembly standard on RSRE

Optional Features

N/A

  • Modbus Equipped Variable Speed Control Card (ENAC) compatible with Envirco® control systems
  • Direct connection to air conditioning supply
  • Ducted Inlet Connection (shipped loose)
    • 10" (254 mm)
    • 12" (305 mm)
    • 14" (356 mm)
  • Airflow indicator light: Allows external monitoring of motor operation; green indicator is ON during normal operation
  • Filter Load Indicator Light
  • Pressure Transducer for continuous filter monitoring
  • Flow-through light fixture provides illumination with minimal airflow disruption
  • Powder coat white paint or stainless steel housing
  • Room-side 3/8" Challenge Ports: convenient aerosol challenge and HEPA filter testing
  • ULPA 99.9995 % at 0.12 micron PTFE and low boron
  • 3/4" Knife Edge: Permits easy placement in gel track ceiling grid system (available on RSRE units only)
  • MERV 8 pre-filter available
  • Stainless Steel Diffuser Screen
  • 1 Maximum CFM rating base on free air volumes at high speed motor setting.
  • 2 Add approximately 10 lb for Stainless Steel exterior.