-
Clean Room Lighting
clean-room-lighting
-
Clean Room Sealed Troffer Light Fixture 2’ x 4’
Lighting for Complex Cleanroom Environments
Totally sealed housings with Flush with Grid Lens Frames, gasketed lenses, and uniform lighting make CGE Series ideally suited for CLEANROOM, Hospital, Food processing and Scientific lab areas, where contamination free environment must be achieved at a lower cost.
Features- Sealed, painted white, 20 gauge Housing seals to grid
- 2' X 4' nominal Housing size
- Same Housing fits 1" and 1-1/2" standard T-grid ceiling
- Lens Frame is flush with T- Grid and seals to Housing
- Lens Is gasketed to extruded Lens Frame
- Suitable for Class 1,000 - Class 100,000 Cleanrooms
- Low brightness Lens installed smooth side to room
- No tools required to open Lens rame for relamping
- Manufactured to accordance to NSF, FDA, USDA and Federal Standard 2090
- Clean rooms
- Food processing cantors
- Hospitals
- Pharmaceutical and Biological labs
- Wet Locations
-
Clean Room Flow Through Light Fixture 2' x 4'
Lighting for Complex Cleanroom Environments
Open top recessed housings for use with HEPA filters, box cell louver for reduced glare, and unobstructed air flow through the fixture make CLO Series ideally suited for CLEANROOM, Hospital, and Scientific lab areas, where contamination free environment is a must.
Features- 2' X 4' Open top, painted white Housing, seals to grid
- Suitable for Class 10-Class 100,000 Cleanrooms
- Same Housing fits 1", 1-1/2" and 2" standard T-grid ceiling
- Door Frame is flush with T Grid and seals to Housing
- Box Call Louver standard
- Gasketed Access Plate
- Housing accepts standard 2' X 4' HEPA air filter
- Captive flat head Screws (6)
- Manufactured in accordance to NSF, FDA. USDA and Federal Standard 209D
- Optional Lamp Reflectors
- Cleanrooms
- Electronics labs
- Hospitals
- Pharmaceutical labs
- Biological labs
-
Tear Drop Cleanroom Light Fixture 2', 3' & 4'
Lighting for Complex Cleanroom Environments
Aerodynamically shaped housings, which will not cause turbulence in laminar flow cleanrooms, smooth outside surface, and row mounting make CLT Series ideally suited for CLEANROOM, Hospital, and Scientific lab areas, where contamination free environment is a must.
Features- Aerodynamlcally shaped 20 gauge steel sealed Housing ideally suited for Laminar flow rooms
- Works with 1", 1 1/2" and 2" inverted "T" ceiling grid
- 2, 3 & 4 ft. fixture length matches nominal grid length
- Can be mounted In continuous rows
- Gasketed Lens with internal prisms and smooth outer surface
- No exterior hardware
- Manufactured in accordance to NSF, FDA, USDA and Federal Standard 209D
- Suitable for Class 10-Class 100,000 Cleanrooms
- Clean rooms
- Electronics labs
- Hospitals
- Pharmaceutical labs
- Biological labs