The MAC 10® LEDC 4 x 4 is a versatile fan filter unit that is designed for the most challenging cleanroom applications. It offers significant cost savings and electrical efficiencies for large cleanrooms.

The MAC 10® LEDC 4 x 4 maximizes energy efficiencies with its exclusive backward blower wheel design. It provides 90 fpm airflow up to 1.0" wg static pressure levels enabling cleanroom projects to operate cost effectively.
Unit of Measure

Specifications

Brands

N/A Envirco®

Voltage

N/A 277 V

Frequency

N/A 60 Hz

Phase

N/A 1

Full Load Current

N/A 4.50 A

Filter Housing Material

N/A Mill Finished Aluminum

Industry Standards / Certifications

N/A cUL listed (115 V, 208-240 V, 277 V) with standard UL 900 filter, File number E152685 (UL507)

Filter Type

N/A High Efficiency Particulate Air (HEPA)

Filtrand

N/A Particulate

High Efficiency Particulate Air (HEPA) Filter Efficiency at 0.3 Micron Size

N/A 99.9 %

External Static Operating Pressure

N/A 1.0 inWg

Intended Application

N/A Cleanrooms

Orientation

N/A Horizontal

Environment

N/A Chemical Resistant Corrosive Atmosphere

Airflow

N/A 90 FPM ± 10 FPM average velocity, 6" from diffuser screen. Uniformity ± 20% of average or better.

Performance

Nominal Unit Size

N/A 4 x 4 ft

Active Filter Face Area

N/A 12.1 ft²
Maximum Air Flowrate1 N/A 1900 ft³/min

Energy Consumption Rate at Maximum Air Flowrate

N/A 610 W

Air Flowrate at 90 Feet per Minute (ft/min) Average Speed

N/A 1100 ft³/min

Energy Consumption Rate at 90 Feet per Minute (ft/min) Average Speed

N/A 150 W

Unit Weight

N/A 150 lb

Note

N/A Performance tested in accordance with the (ANSI/AMCA 210-07), (ANSI/ASHRAE 51-07) test standards for Certified Aerodynamic Performance Rating.

90 fpm values based on active filter face area.

BTU = Watts x 3.413.

Dimensions

Dimension A

N/A 47.63 in1210 mm

Dimension B

N/A 47.63 in1210 mm

Dimension C

N/A 17.92 in455 mm

Construction

N/A Welded aluminum cabinet with exterior finished in corrosion resistant polyurethane enamel.

  • Walkable Plenum 250 lb.

Filters

N/A Aluminum framed High Efficiency Particulate Air (HEPA) type, with a minimum efficiency of 99.99 % at 0.3 micron, aerosol challenged (zero probed).

Motor/Blower Assembly

N/A Direct drive, continuous duty motor with sealed-for-life bearings and inherent overload protection. The blower assembly is electronically (dynamically) balanced and is designed to provide rated airflow through a 50 % increase in initial static pressure.

Additional Information

N/A Fewer components mean lower installed costs. With use of the MAC 10® LEDC 4 x 4 unit, additional savings are captured in the ceiling plenum because less grid is required and fewer electrical connections are needed. Even better, this model also provides a lower sound level than most competitive 2 x 4 fan filter units.

Features

N/A

  • Low sound, low watts, low profile, and low operating costs.
  • Energy efficient EC motor.
  • Universal control card offering local, Modbus, or analog options.
  • Aluminum construction with mill finish for durability.
  • Meets IEST recommended practices.
  • Protective inlet ring.

Optional Features

N/A

  • Ultra Low Penetration Air (ULPA) filter - 99.9995 % efficient at 0.12 micron particle size.
  • DC Monitoring and Control System - Enables facility to adjust speed levels as required and assures that units are operating properly.
  • CE Marked - 230 V units available.
  • Exterior is available powder-coated or stainless steel for chemical resistance in corrosive environments.
  • Pressure switch with indicator light to show filter loading.
  • Green indicator light showing motor failure.
  • Room-side Replacement (RSR) available with gel seal filter element; filter is replaceable from the room-side.
  • RSRE provides filter and motor/blower assembly replacement from the room-side.

  • 1 Maximum CFM rating base on free air volumes at high speed motor setting.