Request Information
The positive pressure unidirectional airflow provides product or sample protection within he work area, which is defined by the removable clear acrylic side panels and built-in plastic laminated work surface.

Standard Features
  • Four standard sizes with 24 inch deep work areas. Custom sizes available.
  • An ISO Class 5 environment utilizing an aerosol challenged HEPA filter.
  • A welded metal cabinet with a corrosion resistant, polyurethane enamel finish.
  • Two-piece construction allows easy passage through a standard doorway.
  • Quiet operation (65 dBA ± 3 measured 30 inches from the filter face).
  • Perforated anodized aluminum diffuser screen protects the HEPA filter while maintaining uniform air velocity within the work area.
  • Non-glare plastic laminated work surface for easy cleaning.
  • Built-in fluorescent lighting provides 150 foot candles at the work surface.
  • Clear, removable acrylic side panels.
  • Duplex electrical outlet, 115V, 15 amp on the front leg for easy access.
  • Solid state speed control with RFI suppression.
  • Limited 1-year warranty.
NOTE: Positive pressure unidirectional airflow units provide product protection only. They do not protect personnel or the environment from particulates or aerosols generated from within the work area.
Unit of Measure

Specifications

Part No.

 N/A 10553

Dimension A

 N/A 63 "1600.2 mm

Dimension B

 N/A 65 "1651 mm

Dimension C

 N/A 30 "762 mm

Dimension D

 N/A 30 "762 mm

Dimension E

 N/A 24 "609.6 mm

Dimension F

 N/A 44 "1117.6 mm

No. of Blowers

 N/A 1

BTU/Hr

 N/A 3000
Airflow1 N/A 1125 CFM 1911 m³/hr
Power Requirements2 N/A 9.2 A

Shipping Weight

 N/A 600 lbs272.2 kg

Construction

 N/A Welded metal cabinet with exterior finished in corrosion resistant polyurethane enamel.
  • Non-glare plastic laminated work surface.
  • 1/4 inch clear acrylic side panels.
  • Adjustable leveling feet on work bench.

Prefilter

 N/A Washable type, polyurethane foam - 30% ASHRAE.

Motor/Blower Assembly

 N/A Direct drive, continuous duty 1/2 Hp with sealed-for-life bearings and inherent overload protection. Motor/blower assembly is electronically (dynamically) balanced and mounted on vibration dampening rubber mounts. Motor/blower assembly is designed to provide rated airflow through a 50% increase in initial static pressure.

Speed Controller

 N/A Solid state speed control (with RFI suppression) for adjusting airflow velocity.

Electrical

 N/A Standard 15-20 amp, 115V, single phase, 60 Hz, rubber overed cord with 3-prong grounded plug. Recessed fluorescent lighting fixture provides 150 foot candles at the work surface. Separate blower and light switches. 220V, 50-60 Hz unit available with transformer.

Options

N/A Lab Service (work deck installed), Part No. 10231 Magnehelic Pressure Differential Gauge, Part No. 10693 Stainless Steel I.V. Rod, Part No. 10595 (4 ft), 10596 (5 ft), 10597 (6 ft), 10598 (8 ft) Stainless Steel Side Panels (Qty 2), Part No. 830657 UV Light Fixture, Part No. 10599 (4 ft), 10600 (5 ft), 10601 (6 ft), 10602 (8 ft). Stainless Steel Work Surface, Part No. 10585 (4 ft), 10586 (5 ft), 10587 (6 ft), 10588 (8 ft)

Applications

N/A Analytical Balances Critical Sample Preparation Microelectronic Fabrication and Assembly Microscopy Analysis Optical Assembly Pharmaceutical Preparation Quality Control Inspection Station Sterility Testing Tissue Culture

  • 1 Avg. CFM @ 90 FPM (m³/hr @ 0.45 m/s)
  • 2 Amps @ 115V/60 Hz